Thursday, May 22, 2014

Custom Cornhole Boards

I had a customer request to see how his Cornhole boards made. I've never posted pictures or descriptions before, so I thought why not?

I start off with 4/4 S3S Poplar boards. 4/4 means they are 1" (13/16" in actuality) and S3S stands for Surfaced 3 Sides. This leaves one rough sawn edge. I use 1/2" birch plywood for the playing surface.


After cutting the boards on the table saw to rough dimensions, I run them through the jointer to square the sides with the faces. Then its several passes through the planer to reach 3/4" thickness. I then return to the table saw to rip them to their final width.

Accurately cutting your stock is key. I use a double-ground solid aluminum Master Plate and a digital protractor to ensure a square cut, and a digital "angle cube" for perfect 45 degree angles.



After much trial and error, I finally found made the right template for the legs. The angle on the bottom stays flat on the ground while bringing the height of the back of the board to 12", required for a tournament approved board. I use the bandsaw to cut the round top, and finish it off at the drill press with sanding drum.




Once the corners are cut on the side pieces, I use stacked dado blades to cut a 3/8 x 1/2 rabbet. This allows the plywood top to sit down inside the case. This hides the "plys" and makes the board much stronger and less prone to twisting.



 I use a plate joiner to cut slots in the miters, then add glue and biscuits, again, for added strength.


After gluing up the frame, I glue and brad the top down. Using a 6" hole saw I cut out the 3-point hole. 



After finish sanding & applying primer, I tape off the areas for the logos and spray the main color.


I then use a craft knife to cut out the logo, and paint some more.


After much more painting and touch-ups, they are sprayed with 3 coats of gloss clear water based acrylic. 



The next steps are to cut the holes for the buckling straps and carrying straps. (Pictures to follow)



Wednesday, February 13, 2013

UPDATE, FINALLY!

WOW! It's been a crazy few months here around the homestead. After battling the flu, walking pneumonia & strep throat for 3 weeks straight, our household is finally "sickie free"! Going through all of that put me a tad behind in the shop, but I'm back on course.

Currently working on the oak crib for my friends uncle. Its the same pattern as the crib I build for my daughter, but we changed the spindled back to a solid panel. Its a lot easier to build the second time around! Here is a rendering of what it will look like:

 
Designing my next project for a friend of mine. She was looking for a mudroom bench with coat hooks and over/under storage compartments. She showed me a few items she liked and I measured for fit and came up with this:
 
 
 
She also wanted a "huge" bookcase for her new family room. This will not only house their collection of books, but also family pictures and home decorations. Bookcase will also feature puck lighting. Approximate size will be 12' wide by 8' high.
 
 
 
And last but not least, a repeat offender (!) wanted a third storage bench, so I drew this up:
 
 
So, If you dont hear from me for a while, I'll be in my workshop beneath a pile of sawdust!  Mark





Tuesday, January 15, 2013

Jigsaw Puzzle Table

My Dads cousin contacted me shortly before Christmas to see if I could build a table for assembling jigsaw puzzles. She is a flight attendant and had seen one in a SkyMall catalog, and wanted to get it for her son. After reading the poor reviews the product was given, she decided to contact me. I had never seen one before, so I did some research online. There was not much info to go on, so I opened up Google SketchUp and got to work. Figuring out the angles for the legs and the fold out leaves was a challenge, but I think it turned out very well.

 Now, if only I had the time and patience to be a "puzzler"!

 Folded for transport/storage
 
 Antique Brass Sash locks keep puzzle pieces in place during transport/storage
 
 Legs fold into eachother via rabbets cut on inner legs
 

 Legs splayed @ 115º angle. Notice rabbet cut out of right side legs.

 Leaves open to 165º via brass knife hinges and end cap cut @ 15º on top
 
Completely open and ready to play!
 
 The only puzzle we own: My 4 year olds Dora the Explorer Puzzle!
 
 Fold out leaves hold pieces until they are ready to be fit in the puzzle.
 

Wednesday, January 9, 2013

Busy as a Bee!

Lots goin on in the shop these days. Trying to finish up on a Jigsaw Puzzle Table & a Chess Box. Had to squeeze in a couple of custom washer boxes for some high school softball fundraisers. Got a couple new orders to start working on when I wrap these up. More to follow........
 

 

 

Sunday, December 16, 2012

Adirondack Trio

Tis' the season for giving. A friend of mine is having me make an Adirondack chair with ottman & a couple side tables for a family member. I've only worked with Western Red Cedar once before on a small project, but I love the smell when its being cut. As with a few of my other projects, the wife likes it so much she now wants on for our patio!



Sunday, November 25, 2012

Laundry basket madness

Life in a small house with 2 small children has its challenges. One of the biggest ones I find is what to do with laundry baskets between wash cycles. There is really no place to store them that is out of the way. They always end up on our bedroom floor taking up valuable real estate. Browsing one of my favorite DIY sites (www.ana-white.com) I stumbled upon this unique solution. I'm going to make my own alterations to it to fit my specifics, but all & all, it will look very similar. I probably will leave the lettering off, but I love the distressed paint.

Washer/Dryer Pedestal

Just like the real thing......only smaller.

******UPDATE*******
Finished this mini shed and it turned out great, IMHO! The customer was very pleased and promised Christmas morning pictures! But here are a few photos of the finished project!







On a referral from a wonderful friend, I was contacted by a new client to commission a toy shed to house all of her sons toy tractors. She sent me pictures of their new barn/shed they are having built on their property, and wanted a scaled down version made. I was also given the paint swatches so I could match the sames color pallet! The roof will hinge open and the doors will slide open/closed.

Pictures to follow!

New Additions!

So my best friends Uncle, whom I've known for 25 years, just became a 1st time Grandpa! He has asked me to build a crib for his grandson for when he visits. I'm so excited to be building another crib (I built both of my girls' cribs) and hope this can become an heirloom to be handed down the generational line.

Here is a rendering of what I am going to build. It is similar to my oldests' crib, but he wanted a solid back. It is going to be built out of solid Red Oak. Progress photos added as I go!

Friday, November 2, 2012

Wine Glass Caddy

Looking for a great Christmas gift? This little glass caddy fits over most wine bottles and can hold 4 glasses. Great, inexspensive gift for a Christmas/New Years party host! $12 each (does not include wine bottle or glasses!) 6"x6"x3/4" Available in a multitude of woods: Red Oak, Maple, Hickory (pictured), Walnut, Cherry, Ash, whatever I have laying around!

Tool tray

An old friend got tired of his extenstions and punches rolling all over his toolbox. So he called me up and asked for something simple to keep his tools in over. I grabbed some scrap red oak and jointed them together and using a 1/2" cove router bit, cut little flutes for the tools to lay in. I left some room at the top for any future tools he may want to add.  I then applied 3 coats of General Finishes Arm-R-Seal Urethane Topcoat in Semi-Gloss to give it a great but cleanable surface.

Happy All Souls Day!

Let me start off by saying Happy Birthday to my beautiful wife of 10 years!

 Started a new project this week for a friend of mine. She wanted a bench that she could store her 31 utility totes in, to keep her daughters room clean. Did some CAD work and came up with this. Nothing too fancy, but very functional. Using 1/2" sanded ply keeps it light, but using biscuit joinery and glue makes it very sturdy. A couple coats of paint and it will be ready for years of use and abuse!

Overall dimenstions are 56"w x 24"h x 14"d

Thursday, October 25, 2012

cool-warm-hot-cold-wet!

Welcome to the Midwest! Woke up this morning @ 6:30, sat on the back patio with my cup of Joe to a bit of a chill in the air. Things got a little warmer, up to 80 degrees in the house, then came the storm and the temp dropped down to 60!
Good news is I got some lacquering done today. Took quite a bit of time to tape off all those panes of glass! Just have to do the back of the doors and she is finished!
Cant wait to deliver it to the customer. She has not seen any pictures, so this could be adventurous! I hope she likes it! If not, I've had a few other offers for it!

Wednesday, October 24, 2012

Fall Cleanup

My poor shop. When you get in the thick of a project, order goes out the window and chaos ensues. Tools everywhere, sandpaper discs on the floor, LEAVES in every nook and crannie. Time to bust our the broom (and dust mask!). I spent 2 hours tonight vacuuming, dusting & wiping down the big tools. Was going to start putting lacquer on the Distressed Display Cabinet doors & shelves, but little black bugs were flying everywhere, and would get stuck in the finish. I guess the warm weather the last few days brought them out of hibernation. BOO. Ah well, as the French say, "C'est la vie".

Welcome to Majic Woodworks Blogspot!

Welcome to Majic Woodworks blog. Hopefully I can continue to post frequently. I plan to keep anyone who cares (LOL) abreast of my current projects, posting “during” photos and ultimately finished projects